Rig #6
A. Workover/Completion Rig – Evertson International Rig #6
2001 Hopper model GXXTA, totally remanufactured by OEM to
API specifications. All supporting documentation will be supplied before rig
inspection. Includes 260,000#, 102’ Hopper four-legged mast; new safety
ladder-climbing device; six-line crown and block with 1" drilling line;
separate hydraulic system for tongs and winch, powered by a 60 h.p. electric
motor; sand drum with 16,000’ of 9/16" sandline; hydromatic brake;
Crown-O-Matic; new GM8V92T motor rated at 500 h.p.; new Allison 6061 6-speed
automatic transmission; new 6,000# hydraulic winch with 0.50" line;
tubing board capable of racking 12,000’ of 3.50" tubing or drillpipe,
8,000’ of 4.50" tubing, or 6,000’ of 5.50" tubing; new Clincher
tubing tongs, slips, and handling tools for 2.375", 2.875",
3.50", 4.50", and 5.50" tubing; all tongs, elevators, and
handling equipment for rods from 0.75" thru 1.25"; new 14’x12’
working floor with all safety handrails, ladders, slide, and stairs; catwalk
with safety handrails and ladder; two sets of pipe racks;
B. Pump and Circulating Equipment
New Gardner-Denver model TGH triplex pump, rated at 500 h.p.,
powered by new Cat 3306 motor, rated at 475 h.p. with either 4" or
5" liners. Complete with new hydraulic-powered 5"x6"
centrifugal charging pump and suction manifold for multiple intakes.
Skid-mounted unit. 150 bbl., three-compartment mud tank with stairs and
handrails. All hardline, chiksans, bails, hoses, and manifold rated to at
least 5,000 psi. and tested to 5,000 psi. All come with 2" Weco 1502
unions to prevent mis-matched unions. Pump/choke manifold is five valve system
with rated at 5,000 psi. with 2" Halliburton 10,000 psi. valves and
2" 5,000 psi. adjustable choke with air/hydraulic test pump with
recording chart for testing BOP’s and manifold. Manifold is securely mounted
on steel rig-up pad.
C. Generator House/Tool Room/Supply Room/Shop
12’x40’ skid-mounted metal building with electric
powered air compressor, arc welding equipment, oxy/acetylene welding and
cutting equipment, spare parts and consumables storage, work bench with vise,
tool storage, new high pressure steamer/washer with sufficient high-pressure
steam hose to reach all equipment on location. New Cat 210 kW generator,
powered by new Cat 3406 motor installed within house. Proper electrical
connections in a covered box to operate entire rig and camp. New Perkins 150
kW standby generator, skid-mounted, that plugs into power grid of generator
house with safety switching between the two generators.
D. BOP and Accumulator
Remanufactured Hydril ‘GK’ annular BOP with new Reedy
three-station, 40- gallon accumulator with 80 gallon oil reservoir, charged
with Cat 56 triplex pump powered by 20 h.p. explosion-proof electric motor and
50:1 air/hydraulic back up system. Skid mounted with overhead beams and mount
for BOP.
|
